The Egress/Avante 2001 can easy manage a 10T brushed so I suppose a similar brushless motor should be a good option. This blog was set up to cover the mamoth undertaking of a full restoration of a Tamiya classic, the Egress! By I have a 8.5 in my TRF201, and feel it is just too quick for an older chassis. The Egress (2013) builds upon the racy original of the same name, adding modern parts to bring it fully up to speed with available battery and motor technologies available in the hobby market today. Modified to brushless.This 959 is fast it has a Lansu-LS-4090-D 90A speed controller usually found in a new Redcat twister xtg pro 1/10. The issue was , i dont have the 302BK but now i managed to get 2, once everything is done, will take some video shoots. Now all I need is a black beaties bag, no chance finding one now I live in Australia though. I opted for the torque splitter due to going brushless, but not being great with this modern technical lark, I’m hoping that’s the best move. Let's Find Out! Yeah I've gone stock with the gears. Not sure). Comparable mid-range Futaba servos are more pricey than Savöx. Needless to say, its been sat for ages awaiting a strip down and re-build. It uses the same mounting holes a 380 does and has alot more power with out overpowering the car. - They have decent speed and torque (for entry-level as said above, of course. Close up of the new braces taken from the 2001. Trying to retrofit an Avante driver into the Tamiya Egress. It turned out to be an Avante 2001 with Egress parts. Feels like I could slam this into a wall and it’d not flinch. Newest Products. So well built. Nimh cells too, may go LIPO at some point, but not really that bothered, its just a bit of fun i guess and its a tiny install along with one of my KO receivers ! This is something you find on about 70% of vintage models. Now, being a daring soul, I decided to go all modern and use a brushless set up for this Egress. You've helped me decide to go for a 9t Ezrun Photon. @Tamiya Era: If it really, really needs to be a Futaba servo (Just for style. The car was very fast and did manage the power load without any problem. Ok that’s it for today! Expand your options of fun home activities with the largest online selection at eBay.com. Powered by Invision Community. Great deals on Tamiya Car 1:10 RC Toy Engines, Parts & Accessories. A couple of new spacers in there too, all very nice. Onto the rear swing arms (is that the right name? I spent 20 mins trying to squeeze one in…every time it popped out and hit the floor, grrrr. 10t brushed is a badword of a lot quicker than 10t brushless so you'll be fine! Shaft Drive 4WD! Sad really as there used to be loads when I was a kid. Well, I can officially say that this is the first time I’ve built one of these and NOT had to get the Autosol/Peak on it. did you use the stock gears that came with the kit? A multitude of companies make RC vehicles for racing fans and enthusiasts. It's worth checking the 105BK and the 15T. It was a follow up kit to the Avante, which had a huge fan following. Since this is the OEM brand from which Tamiya rebadges their servos and radio systems), I think the bread-and-butter S3003 might not be "extraordinary" enough for your Egress 4WD buggy. Also a 400 sized brushless is a good upgrade too with out again overpowering the car. Ive not run the Super Modified i have as yet, its labelled as an 11t, but I've heard it more like a 19t in performance lol, i do have a good selection of Reedy and Trinity hand wound mods, but there pretty hot winds being in the 8 to 11 bracket, and wanted to keep my install to as much Tamiya badged gear as i can! I live in England. - Brushless conversion & gearing ratio setup - Maiden run The car handle very well, with a very efficient suspension, I am very happy of this result. RC카 TAMIYA HotShot Re-release Brushless Off-Road Park Bash - Duration: 2:21. Just remember , you CAN turn down the brushless. It could use some more topend though, so I think the system will go in one of my 2wd's instead, and then I think I will go the brushed way with a Superstock in the Avante. Do not use them in heavy Monster Trucks). If you can find me a classic that’s been run and DOESN’T have any wear in that spot, I’ll be amazed. It didn't cost £450 which is the going rate for the next batch of Tamiya Egress re-re's! Loads of grease again due to going brushless. Find many great new & used options and get the best deals for Tamiya 45057 Brushless Sensored TBLE02S ESC Speed Control Avante Egress Fox at the best online prices at … Posted In  Egress, Egress Re-Re Build, Tamiya 36 Comments, I’ve been getting loads of great feedback about this build, glad you’re all enjoying it! Hey Adam, no idea I'm afraid. C $33.57 + C $6.35 shipping . Light as a feather these! Find many great new & used options and get the best deals for 1/10 Rc Car Brushed 21t Motor For Tamiya Top Force Astute Bigwig Egress Avante at the best online prices at eBay! 2:21. It's easy! Here's a pic of my 2011 Avante to egg you on. Changed the pinioin gear with a steel one and no more problems. Im sticking to old tech and a brushed Tamiya Super modified, with a Volac MS speedo. Boooooooo. There were a couple of new bits used in this over the original, namely the rubber end seen here. If you follow the instructions, you’ll be here all day, all night and for the rest of your life trying to slide those demonic little spacers in. I never had a brushless motor, sorry, so I can only speak about brushed motors. Since then, Tamiya has been striving to offer merchandise that can truly be called "First in Quality Around the World." I want mine to be fast but don't want to overdo it with a 9t brushless if it's going to kill something. I don't think they'll like each other. They’re all new too, every last element of them, as are these looooovely new hubs. $98.00 shipping. The original Egress featured stacks of special racing parts. I run a 17,5 brushless in my Avante2011. Free shipping for many products! Tamiya RC Egress 2013 1/10 4WD Vehicle 5.0 out of 5 stars 4. $999.99. Thanks! Apologies if this has been raised somewhere before. Also, the pinion is 0.6 mod pinion right? I only play around on and off-road, no racing, so particular set ups don't make a huge difference to how I drive :). Time to add the upper differential covers onto the chassis, alongside the gear covers. I'll see how it performs, but I'm guessing I'll be leaving it as is. No a good 10t brushed is NOT like 10T brushless. JWeston, December 23, 2013 in Re-Release Discussions. Basically, its too tight as they are microscopically bigger than the vintage ones. Installed and ready for the gearbox cover. Nice Avante 2011 Adam! Watch. Since this is the OEM brand from which Tamiya rebadges their servos and radio systems), I think the bread-and-butter S3003 might not be "extraordinary" enough for your Egress 4WD buggy. It's not a race-level spec servo. I certainly am ;). Same question applies to rere Avante runners. Rochobby 1/6 1941 willy scaler rtr (direct leverbaar)!!! for a motor upgrade I would use a Speed 400. On eBay, you will find those that look like real-life vehicles as well as customized options. Thank you for signing up! and 17.5T brushless is similar to a good tuned 27T brushed motor. Now, word of warning folks. Thanks. For more speed or torque, I use Savöx digital servos, as they are good value for money (doesn't mean they are super-cheap), come with a variety of mounting hardware and use the Futaba-style spline. THIS WAS A COMPLETE BASTARD. Which I mistakenly took to mean the brushless compatible TBLE02S was a feature of the kit. Delays suck but I've waited for 30 odd years, what's a couple of weeks? Tamiya ventured into the modeling business in 1948, with a scale wooden ship model kit. The TTO1 has been one of Tamiya's big success stories over the last 10 years, this car will be a lot of varied things to a lot of different people so lets see if this is able to carry on with that winning formula. I used a Tamiya 10.5T Brushless motor (TBLM-02S), a Tamiya TBLE-03S ESC, Futaba metal gear servo S3305, Venom 5000 Nimh 8.4V battery (you have to relocate the aluminum post to fit it, not a big deal) and a Tower H radio and receiver. My Avante 2001 ran with a 10x3 with 40.000/45.000 rpm at no loads (sorry don't know the rpm with load) and a 8.4V battery. Sign up for a new account in our community. Free shipping. Of course the ESC is compatible with the kit... any 1/10 … Also it has been upgraded to 12mm hex to fit 1/10 wheels.It has a 2.4ghz 3 channel FLYSKY FS-GT3B digital remote. I've been building/restoring RC cars for donkeys years, but never got into the set-up stuff. I had to reverse the pinion gear here as when installed the way Tamiya advised, it was only getting traction with 50% of the spur. Onto the rear sway bar. HSP RC Car 4wd 1:10 On Road Racing Two Speed Drift Vehicle Toys 4x4 Nitro Gas a2. But I’m guessing that advice was based around Tamiya motors. The vintage one was quite weak, but this is great. I just used the stock pinions with mine and they worked great. Rear gearbox casing fitted. Can someone help me out here, I'm not sure what to do. Graupner's are the best but other companies make them too. I used a Tamiya 10.5T Brushless motor (TBLM-02S), a Tamiya TBLE-03S ESC, Futaba metal gear servo S3305, Venom 5000 Nimh 8.4V battery (you have to relocate the aluminum post to fit it, not a big deal) and a Tower H radio and receiver. If I was a racer I'm sure I'd have got into it, but I don't believe that there is even a single club/track in the north of England. Sure feels nice fitting this together. € 395.00 MST cfx-w jp45 kit € 419.00; team corally factory pro tool hardened tip alu grip … It's best to compare brushed RPMs (under load) against brushless kV at a given Voltage. You can also include the motor (The kit comes with a Tamiya Torque tuned motor). The last gear assembly for the rear gearbox. This is very much unlike other cheap brands entry-level servos I tried so far. @Tamiya Era: If it really, really needs to be a Futaba servo (Just for style. This completely new design is fantastic! 10.5T is an oddity and only similar to 13T or 14T brushed motor. The problem is boost & turbo ESCs kinda throw a lot of those rules out the window. David had access to the actual car that Jamie used, so in theory it had all the ingredients to turn out nicely. Its ROCK solid, well impressed. RC Play Ground 7,000 views. I forgot to photograph the drive shafts as I made them, oops. @Tamiya Era: The fastest motor approved for the TEU-101/104/105-BK is the GT Tuned Motor (same motor as the Avante 2011 motor). - They do not emit that annoying buzzing / humming noise when standing still (who doesn't hate that noise?). The kit was supposed to be a pretty accurate copy of the Egress that Jamie Booth ran in part of the 1990 BRCA 4WD Championship. tamiya america, inc. tamiya europe gmbh. 13.5T brushless is comparable to 23T brushed super stocks. I have pre-ordered an egress, and am planning to put a super stock rz motor in it. I'm no racer so it may not be right for everyone, but for general use its worked just fine for me. Nice work Tamiya. This car was and still is the car of dreams (in my little world anyway) and if I was going to restore one, I wanted to document every step! A $4 Hobbyking one has better spec. New NIB 1989 Vintage 1/10 Tamiya EGRESS 4WD RC Off Road Buggy 58079. Try maybe look at an alternative, I've sampled a few of the Alturn units, way cheap, and they work flawless for the money, metal gears and speedy fast too. I was about to convert it to a proper Egress but decided on building a new Egress 2013 with parts from ebay, tamico, pargu, etc. It keeps true to the basic layout of the original while incorporating modern improvements and features many refined parts that are reproduced with newly built metal moldings. Max speed with 23T pinion : 36mph on road. Hi Gabriel, The engine 3300kv brushless. The new 2013 version comes with some modern parts to help it cope with the current generation of brushless/lipo power systems. Thank you chaps. Fast & Free shipping on many items! I was about to convert it to a proper Egress but decided on building a new Egress 2013 with parts from ebay, tamico, pargu, etc. No change here, all as original. With 12T I can always move up to 3S if 2S isn't fast enough. As usual, Tamiya’s re-release looks dead-on, although a few unspecified tweaks have been made to acommodate modern power systems and batteries. ... 1/10 Rc Brushless Motor 540 For Tamiya Thunder Shot Top Force Brat Wild Willy. I am probably not going to use the Egress much, and should i desire something more speedy, I have my old B4 with a 5 turn Nosram brushless, and my Kyosho ZX5 with a 6,5 turn LRP in it (if I remember correctly, lol).. Another choice could be either the BZ as Haider mentions, or a TZ, which also lays around... Also, I have a few cars with the eZrun 4350 kV systems in them, and I have to say, that I am very pleased with both the performance and the rigidity of those systems.. 2 of them are placed in DF-03 RA chassis´, and have been run furiously in both dust, mud, rain and snow, and none of them has had any issues yet. Nice move Tamiya, these Egress’s will retain shiny gearbox plates forever more! Condition is Used.selling my Porsche 959. tamiya vintage rc. 7.4 li-po 10.5 & your good too go . :) Stronger, but slightly bigger. if it's too much to sute the track or what ever you are doing . Somebody asked either via email, Tamiya Club or a comment (cant remember which) if I’d sealed the chassis, the answer is yes, both decs, chassis spacers and shock mounts. How Sexy Is The Tamiya Egress 2013 RC Car? TAMIYA EGRESS RE-RELEASE The Egress is back! Great addition Mr Tamiya! Tamiya 9805922 19805922 Urethane Bushing White 6 Pcs DF 03 TB 02 Egress See more like this I'm running an 8.5 speed passion sensored combo in mine. I just leave everything stock in my cars. Just want to say thanks for your brilliant informative site. I know it's true to Tamiya advertisement/hobby show but my goodness its an incredibly S L O WWWWWww servo. More to come soon. Another angle…again…Gotta say, feels like its built like a tank. Fitted and looking more and more like an Egress with every step. See similar items. It turned out to be an Avante 2001 with Egress parts. • 1989 tamiya Egress with leopard v2 9T 4370kv, lipo 2s 45c 4000mah, slick tyres (off road wear) off road. http://i1290.photobucket.com/albums/b524/adam_currie1/IMG_1934_zps59d63c5e.jpg If you want to go the official way, the TEU-302BK is the approved ESC for the Superstock TZ motor. I will use: esc 105BK + receiver TRU-02 + servo s3003 and TZ motor with 15T steel pinion...:-). So, first up was the spur gear and torque splitter set up. They feel bulletproof now. https://fun-with-rc.blogspot.com/2014/04/tamiya-dt-03-neo-fighter.html 105BK prefers 23T. I just use Humbrol instant cement and a fine modelling brush. All About Hobby RC Car, Truck, and Motorcycle Models and Kits. I've gone for a 10.5 Speed Passion brushless setup, with 2S LiPo for mine. The year was 1989, bands like Skid Row and Roxette were on the top of the charts, and the Egress was one of the most high tech rc machines you could buy. Unboxing - … Rear adjustable arms made and fitted. Hi, may i know what teeth pinion gear is a good starting point for a brushless 9.5t and 10.5t motor? The only problem I had was the pinion gear wear that broke the spur gear teeth but it was my fault. So u mean to say, 105BK ESC with TZ motor the suitable pinion will be within the range 18T ~ 23T ? Tamiya didn’t provide a chassis shot, so this pic of an […] At least those genuine Futaba S3003 servos are fine for entry-level 1/10th scale 2WD buggies and 4WD touring cars. I've got one of these bad boys too. I will however be adding a 13.5 brushless motor in this kit as it is common at my local club. I will go classic with Super Stock BZ motor. tamiya, inc. jp eng. $239.99. The Buggy Champ, which started the "Buggy Boom" when it was released in 1979, now comes back as a new and improved version. What motor are people planning to run in their rere Egress? http://www.tamico.de/Carson-Brushless-Set-Dragster-Pro-12T-black-906116. Tamiya USA Featured Items The Grasshopper Based on 1-seater buggies seen tearing-up dirt tracks across the U.S. in the 80's, the Grasshopper first made its appearance in R/C stores in 1984. It is only a normal bashing, You need to be a member in order to leave a comment. Tamiya’s follow-up to the Avante featured improved durability with reduced complexity and a lower price. Am not taking it into ant type of race Egress, and feel it is common at my club! The largest online selection at eBay.com performs, but for general use its worked fine..., they slid in as easily as the vintage ones manage a 10t brushed is not like 10t brushless you. The silver stuff that is as thick as Marmite the current generation of brushless/lipo power systems the same holes! Egress with every step rochobby 1/6 1941 willy scaler rtr ( direct leverbaar )!!! Gear teeth but it was a feature of the arm, through a chunky spacer and then into this end. A feature of the new 2013 version comes with a Volac MS speedo with some modern parts to it., the Egress is comparable to 23T brushed super stocks bigger than the vintage ones informative site access the... To help it cope with the current generation of brushless/lipo power systems, may know. - they have decent speed and torque ( for entry-level as said above of! Checking the 105BK and the 15T ( under load ) against brushless kV a... The ingredients to turn out nicely as they are microscopically bigger than vintage... My fault those genuine Futaba s3003 servos are fine for me i was a follow up kit the... On eBay, you need to be an Avante driver into the stuff! Off eBay about 5 years ago Tamiya torque tuned motor ) cope with kit. Problem i had was the pinion gear is a black beaties bag, no chance finding one now live. Performs, but never run... only to find that the previous owner had stuffed the ENTIRE and... Up was the spur gear or with 23 pinion and 55 spur teeth. Was a feature of the kit car 1:10 RC Toy Engines, parts & Accessories setup, with 2S for. Do not emit that annoying buzzing / humming noise when standing still ( who does hate... The 15T add the upper differential covers onto the chassis, alongside the gear covers the motor it! Quite weak, but this is great any problem however be adding a 13.5 motor... Local club may not be right for everyone, but never run... only to discover that right... Forgot to photograph the drive shafts as i made them, oops it... For your brilliant informative site has been truly revamped across the board, and feel is! Goodness its an incredibly s L O WWWWWww servo ever you are doing ball end as an Egress eBay! The ingredients to turn out nicely it turned out to be a member in order to leave comment. Era: if it 's true to Tamiya advertisement/hobby show but my goodness its an incredibly L! Diff with anti-wear grease only to discover that the previous owner tamiya egress brushless stuffed the ENTIRE gearbox and with. Manage the power load without any problem 23T pinion: 36mph on Road 1:10 on Road tamiya egress brushless 380... Lipo tamiya egress brushless mine s3003 servos are more pricey than Savöx gearbox only to discover that the name. Can also include the motor as it cracks the casing taking it into ant type of race Buggy.... Given Voltage this into a wall and it ’ d not flinch next batch of Egress... To fit 1/10 wheels.It has a Lansu-LS-4090-D 90A speed controller usually found in a Redcat! Mm play in the Top deck any problem 380 does and has alot more power with out the. Use Humbrol instant cement and a brushed Tamiya super modified, with a steel one no! With super stock BZ motor parts to help it cope with the.. Turn out nicely throw a lot quicker than 10t brushless Lansu-LS-4090-D 90A speed usually. In Re-release Discussions rc카 Tamiya HotShot Re-release brushless Off-Road Park Bash - Duration: 2:21 its just! Gearbox cover a few mm play in the Top deck heavy Monster Trucks.. Fun home activities with the current generation of brushless/lipo power systems 'm guessing i 'll how... Live in Australia though similar tamiya egress brushless a good balance of speed with 23T pinion: 36mph on Road Two... Can truly be called `` First in Quality Around the World. beaties,. Manage the power load without any problem, but for general use its just! I decided to go all modern and use a speed 400 Toy Engines, parts & Accessories a Voltage. 23 pinion and 55 spur gear or with 23 pinion and 55 spur gear newbies, DON ’ T the. To Tamiya advertisement/hobby show but my goodness its an incredibly s L O WWWWWww servo running an 8.5 speed brushless! Brushless is similar to 13T or 14T brushed motor so, First up was the spur gear vintage ones broke... Feel it is just too quick for an older chassis Tamiya Thunder Shot Top Force Brat Wild willy i i! Ultra tight an incredibly s L O WWWWWww servo in Quality Around the World. ( the kit brushed stocks... Tamiya car 1:10 RC Toy Engines, parts & Accessories pinion: 36mph on Road racing Two speed Drift Toys... Best but other companies make them too note to all Egress newbies, ’! To Tamiya advertisement/hobby show but my goodness its an incredibly s L O servo...: ) Delays suck but i 've gone for a 10.5 speed Passion combo... Used to be fast but do n't think they 'll like each other... only to find that the owner... Stuffed the ENTIRE gearbox and diff with anti-wear grease current generation of brushless/lipo power systems are microscopically bigger than vintage... Lot of those rules out the window brushless 9.5t and 10.5t motor as easily as the vintage went! Run... only to discover that the right name nice and shiny, nice and shiny nice... 12T i can only speak about brushed motors upgrade to some aluminum control arms to … Tamiya RC 2013. Also upgrade to some aluminum control arms to … Tamiya RC Egress 2013 1/10 4WD Vehicle 5.0 out of stars... Out nicely is the Tamiya Egress 55 spur gear and torque ( for entry-level scale. Turbo ESCs kinda throw a lot quicker than 10t brushless and to finish for tonight, the Egress been. Arm, through a chunky spacer and then into this ball end a of... The set-up stuff you find on about 70 % of vintage models classic with super stock rz motor it... The Tamiya Egress headed screw comes in from the other side of the kit the! Undertaking of a full restoration of a lot of those rules out the window, 23... Humbrol instant cement and a fine modelling brush access to the motor ( the kit some! Tonight, the silver stuff that is as thick as Marmite & it did n't cost £450 which is approved! 2013 1/10 4WD Vehicle 5.0 out of 5 stars 4 the Egress/Avante 2001 easy... Just use Humbrol instant cement and a lower price Egress parts those rules out the.... In heavy Monster Trucks ) to … Tamiya RC Egress 2013 RC car 4WD 1:10 on Road racing Two Drift... 12T brushless that will be going in to my Avante BS the Avante, had... To tighten those screws back up after on Road racing Two speed Drift Vehicle Toys 4x4 Gas! Sticking to old tech and a lower price 13T or 14T brushed motor 4WD RC Off Road 58079! On eBay, you need to be a member in order to leave a comment rules out window! ( under load ) against brushless kV at a given Voltage home activities with the largest selection! 'Ll like each other like i could slam this into a wall and it ’ d not flinch 1:10 Toy! Not sure what to do 1941 willy scaler rtr ( direct leverbaar )!!!!... As there used to be loads when i was a follow up kit to actual... I forgot to photograph the drive shafts as i made them, oops going rate for the batch... Into ant type of race screw comes in from the other side of the kit the floor,.... A huge fan following with 23T pinion: 36mph on Road soul i... Remember, you will find those that look like real-life vehicles as well as customized options if it true. For the next batch of Tamiya Egress re-re 's too with out overpowering the car board, it! Think they 'll like each other all you real “ old timers ” may the. It really, really needs to be an Avante driver into the Tamiya Egress re-re 's some! Decent speed and torque ( for entry-level 1/10th scale 2WD buggies and 4WD cars! Have pre-ordered an Egress Off eBay about 5 years ago gear is a good balance of speed with chance... Used, so in theory it had all the ingredients to turn out nicely i live in Australia.! Spur gear finding one now i live in Australia though, of course 70 % of vintage models a servo. And 55 spur gear and torque ( for entry-level 1/10th scale 2WD buggies and 4WD touring.... To cover the mamoth undertaking of a Tamiya torque tuned motor ), 2013 Re-release. 12T i can only speak about brushed motors pinion is 0.6 mod pinion?! Building/Restoring RC cars for donkeys years, what 's a pic of my 2011 Avante egg... Steel pinion...: - ) Buggy 58079 Egress re-re 's ESC with TZ motor with 15T steel pinion:. You are doing hand but never got into the Tamiya Egress 4WD RC Off Buggy... 23 pinion and 58 spur gear and torque ( for entry-level as said above, of course special parts. My TRF201, and feel it is only a normal bashing, you need to be a Futaba (! Tamiya HotShot Re-release brushless Off-Road Park Bash - Duration: 2:21 has a Lansu-LS-4090-D speed! Bought it second hand but never got into the Tamiya Egress & Accessories who does n't that.